These bright red retractable lap and shoulder belts feature “aviation-style” chrome lift-up handles and chrome-plated floor anchors. The retractor holds 96 inches of webbing, with 39 inches of webbing outside, for a total of over 11 feet of seat belt webbing. The buckle side is 27 inches long and is fully adjustable for maximum installation flexibility. This system uses an advanced inertial retractor that locks to support both the upper and lower parts of the body in the event of a sudden stop. The retractor may be mounted in either the horizontal or vertical positions. Sold in pairs.
Buckle: 2-3/8" × 2-1/2", inertia locking retractor measures just 3" wide × 2" tall.
Webbing: 1-7/8" wide
Belt Length: 135" on the retractor side, 27" on the buckle side.
These seat belts meet or exceed Federal Motor Vehicle Safety Standards.
Seat belt only. Does not include mounting hardware.
For mounting hardware, see part number AK200.
NOTE: Fabrication skills may be required to establish shoulder anchor point. Please consult a professional installation specialist.
Not for off-road applications. Do not use on a racetrack.
Buckle: 2-3/8" × 2-1/2", inertia locking retractor measures just 3" wide × 2" tall.
Webbing: 1-7/8" wide
Belt Length: 135" on the retractor side, 27" on the buckle side.
These seat belts meet or exceed Federal Motor Vehicle Safety Standards.
Seat belt only. Does not include mounting hardware.
For mounting hardware, see part number AK200.
NOTE: Fabrication skills may be required to establish shoulder anchor point. Please consult a professional installation specialist.
Not for off-road applications. Do not use on a racetrack.
