Fits 1960–64 Galaxie / full-size Ford with FE-series V8 (352 / 390 / 406 / 427) with manual steering.
Upgrade your manual steering to integral power steering. With this integral power steering conversion kit, you eliminate the power cylinder and control valve, and replace the manual steering box with an integral power steering box.
This kit includes the following components for the conversion:
NOTE: This is a special-order item and is not returnable.
It fits the applications listed provided the installer follows the Important Installation Notes above.
NOTE: This is an oversized item. Additional shipping charges will be applied.
Upgrade your manual steering to integral power steering. With this integral power steering conversion kit, you eliminate the power cylinder and control valve, and replace the manual steering box with an integral power steering box.
This kit includes the following components for the conversion:
- integral power steering box
- steering coupler (rag joint)
- hose kit
- power steering pump kit (GM-type with bracket and pulley)
IMPORTANT INSTALLATION NOTES:
- MODIFICATIONS REQUIRED
- Steering column must be shortened to fit conversion box.
- Steering column modifications can be extensive on column-shift cars.
- Power conversion box will not fit with factory clutch linkage.
- Does not include instructions.
We recommend an experienced person with the understanding of modifications to perform this installation.
NOTE: This is a special-order item and is not returnable.
It fits the applications listed provided the installer follows the Important Installation Notes above.
NOTE: This is an oversized item. Additional shipping charges will be applied.
