Fits the following:
1978–79 Bronco
1967–79 F-Series pickup truck
This is the right-hand (passenger side) front section of the cab floor. Made from 19 gauge steel.
Measures approximately 36" × 28".
Bent approximately 45° at about 1/3 the distance from the front, making the forward portion look like an oversized toe board. The outside is flat. The inside border is 3-1/2" deep.
For left-hand (driver side) section, see part number 574-40AL.
NOTE: There is a $10.00 per order boxing fee for this item.
NOTE: This is an oversize item; additional shipping charges will be added.
This is the right-hand (passenger side) front section of the cab floor. Made from 19 gauge steel.
Measures approximately 36" × 28".
Bent approximately 45° at about 1/3 the distance from the front, making the forward portion look like an oversized toe board. The outside is flat. The inside border is 3-1/2" deep.
For left-hand (driver side) section, see part number 574-40AL.
NOTE: There is a $10.00 per order boxing fee for this item.
NOTE: This is an oversize item; additional shipping charges will be added.
