Fits the following:
1978–79 Bronco
1967–79 F-100 / F-250 / F-350 pickup truck
This is the left-hand (driver side) front section of the cab floor. Made from 19 gauge steel.
Measures approximately 36" × 28".
This is the left-hand (driver side) front section of the cab floor. Made from 19 gauge steel.
Measures approximately 36" × 28".
Bent approximately 45° at about 1/3 the distance from the front, making the forward portion look like an oversized toe board. The outside is flat. The inside border is 3-1/2" deep.
For right-hand (passenger side) section, see part number 574-40AR.
NOTE: There is a $10.00 per order boxing fee for this item.
NOTE: This is an oversize item; additional shipping charges will be added.
For right-hand (passenger side) section, see part number 574-40AR.
NOTE: There is a $10.00 per order boxing fee for this item.
NOTE: This is an oversize item; additional shipping charges will be added.
| ⚠️ | WARNING: This product can expose you to chemicals, including but not limited to, lead, sulfur, nickel, chromium, vanadium, titanium, poly-vinyl chloride, and/or 4, 4' - methylenebis (2-chlroraniline), which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov . |
