Fits the following:
1966–69 Bronco (2,700 lb. axle) with small-bearing 8" or 9" rear
1963–70 Fairlane (before 9/30/69) all with small-bearing 8" or 9" rear
1963–64 Falcon 8-cylinder with small-bearing 8" or 9" rear 1965–70 Falcon (except 7-1/4" ring gear) (before 9/30/69) with small-bearing 8" or 9" rear
1961–62 Galaxie / full-size Ford (except locking axle) all with small-bearing 8" or 9" rear 1963–66 Galaxie / full-size Ford (except station wagon) all with small-bearing 8" or 9" rear
1965–70 Mustang (except 7-1/4" ring gear) (before 9/30/69) with small-bearing 8" or 9" rear
1963–64 Ranchero 8-cylinder with small-bearing 8" or 9" rear 1965–66 Ranchero (except 7-1/4" ring gear) with small-bearing 8" or 9" rear 1967–70 Ranchero (before 9/30/69) all with small-bearing 8" or 9" rear
1961–62 Thunderbird all with small-bearing 8" or 9" rear
1968–70 Torino (before 9/30/69) all with small-bearing 8" or 9" rear
1963–65 Comet 8-cylinder with small-bearing 8" or 9" rear 1966–68 Comet (before 9/30/69) all with small-bearing 8" or 9" rear
1967–70 Cougar (before 9/30/69) with small-bearing 8" or 9" rear
1961–63 full-size Mercury all with small-bearing 8" or 9" rear 1964–65 full-size Mercury (except station wagon) all with small-bearing 8" or 9" rear
1963 Meteor all with small-bearing 8" or 9" rear
1968 Montego (before 9/30/69) all with small-bearing 8" or 9" rear
This is the backing plate to retainer gasket with a 2-7/8" I.D. center hole, for small-bearing 8" or 9" rear. Requires 2.
This is the backing plate to retainer gasket with a 2-7/8" I.D. center hole, for small-bearing 8" or 9" rear. Requires 2.
| ⚠️ | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov . |
